Autopower Race Roll Bar - Corvette C5 and Z06 1997-2004

Autopower Race Roll Bar - Corvette C5 and Z06 1997-2004

AUTOPOWER INDUSTRIES manufactures a variety of roll bars and roll cages for street vehicles and all out race cars. Every roll bar or cage has been designed to fit specific car models so only minor modifications are necessary for the installation. Welding is required to mount bar. A great amount of time has gone into developing and perfecting each product to offer the utmost in strength and proper fit.

Full-width roll bar hoop with two rear support braces, a diagonal cross brace, shoulder harness bar and head restraint make up this roll bar.

• Designed for Solo, Autocross and high-speed Time Trials.
• Meets SCCA and most race organization rules.
• Made from 1.75" x .120" DOM mild steel tubing. 2.00" x .120" ERW is used when car weighs over 3500 pounds. You must specify tubing type when ordering.
• 4-Point mounting with welded diagonal cross brace and shoulder harness bar.
• Grade 5 mounting hardware and backup plates included.
• Production time is 3-4 weeks (plus shipping). If you are in a hurry, Autopower will make your bar within 2 weeks and then send it to you unpainted for an extra $105.00.

Available Option:

• Removable (bolt-in) Cross Brace - allows easier access to the back seat area if the car is a dual-purpose street and race vehicle. This option will make both the diagonal and shoulder harness bars removable.

For an idea of how a race roll bar might look in your car check out our sample installation in a BMW E36 M3.

Installation pictures in a Z06.

Special Notes for the Z06:

• You will need to cut the fiberglass floor and drill the frame

Special Notes for the C6:

• You will need to cut the fiberglass floor and weld to the frame

Production time is 3-4 weeks (plus shipping). If you are in a hurry, Autopower will make your bar within 2 weeks and then send it to you unpainted 

•  

  A Roll Bar or Cage is a special order item and is charged to your credit card in advance. A $20.00 cancellation fee will be charged if the order is cancelled after it is ordered and before the item is manufactured. After manufacture, there is no cancellation allowed. Please make your selection carefully, special order items are not returnable.   Shipping Issues: All Roll Bars are oversize items and most are too large to be shipped via UPS. If your roll bar can ship by UPS, actual shipping charges will apply. Please choose "Oversize items in my cart" as your shipping option. Most roll bars and all cages ship truck freight collect. This term indicates that the part is shipped by truck and freight charges will be collected upon delivery. We recommend that you ship to a business address as not only is it less expensive than a residence, but also someone needs to be available to receive your part when the shipper arrives (usually between 9 AM and 5 PM). Please choose "Freight Collect" for your shipping option. All shippers are a little different as to how they collect the monies owed. As we use many different shippers, and your product may be consigned to a third party shipper, we cannot tell you exactly what payment method is accepted. Most (but not all) trucking companies will call before coming and you may then ask them the exact invoice amount and what payment methods they accept. Freight charges can NOT be paid in advance. Cost of freight shipping depends upon where you live in relationship to Autopower in San Diego, California. If you live in California, we estimate about $150-$200. If you are not too much further away, maybe $200-$250. If you live across the country on the East Coast, bet on $250-$325. (Some shipments can be even over $250, these fuel surcharges are getting outrageous. I/O Port has no control over these charges. Autopower does the best they can to keep the charges as low as possible.) If you must ship to a residence, bet on about $20-$30 more. If your delivery is attempted and no one is there to receive it or pay for it, bet on paying a lot more to have it stored and redelivered. Another option is to ship the roll bar or cage to the local trucking depot and you can go there to pick it up. If you would like this option, there is a place for Special Instructions during checkout. If you live near San Diego, California, you may pick it up from the manufacturer. If you would like this option, choose "Pick Up at Autopower" on the shipping selection. Here is an example of a typical shipping quote for a roll cage to Florida done in January 2008: Description   Charge Minimum Shipping Charge $75.00 Fuel Surcharge $15.75 Beyond Charge $35.00 Residential Surcharge $20.00 Liftgate (for items over 100 pounds) $35.00 Freight Collect $25.00 Insurance $4.50 Total $210.25

  Autopower custom makes each item, so please allow 3-4 weeks for manufacture.

• Shipping Cost will be adjusted after we get a actual shipping quote to your address.
• Oversized items must be shipped by LTL Truck Freight. Please ship directly to your body shop or commercial address. The item requires a custom shipping quote to be obtained, and then the total will be adjusted to the shipping cost.