CNC Machined C5 or C6 Corvette Door 6.5" Speaker Mounting Plates

So you're looking to upgrade the speakers in your C5 / C6, Grand Sport, ZR1 or Z06 and you need a way to mount an aftermarket driver in the stock openings. You could use plywood and make the shape yourself, but if you're really into audio then you'll be concerned that wood will absorb moisture and may not be stiff enough to get the most out of the drivers you just dumped a TON of money on. We have exactly the what you need, an exact fit, CNC machined mounting plate made of 5mm (approx 0.205") thick high pressure canvas phenolic laminate. This premium material is extremely dense which makes it very moisture resistant and also very stiff, ready to handle hardest hitting drivers.

The plates (2) are setup for a 6.5" 2-way component set with a 143mm (5.625") hole for the midbass driver and a 46mm (1.8") hole for mounting a tweeter. For those that mount the tweeter elsewhere, the space above the midbass can be used for the crossover instead. Holes are pre-dilled to match the mounting pattern of the door, so all you have to do is drill the pattern for whatever speakers you're installing (pilot drilling STRONGLY recommended!).