AP Racing Essex Front CP9660-2/3S4L 6 pot 372x34/72V Radi-CAL ENP Competition Brake Kit Chevrolet C8 Corvette Base, Z51 2020+

$5,499.00

Model: 13.01.10128-ENP Manufacturers: AP Racing

Qty:

Add to Wish List

Description

Complete front ENP (Electroless Nickel Plated) AP Racing by Essex Radi-CAL Competition Brake Kit for the C8 Corvette Base and Z51:

Advantages Over OEM Brake System:

Approximately 14 lbs. of unsprung weight reduction from the nose of the car
Jewel-like ENP caliper finish is incredibly durable and easy to clean
AP Racing Radi-CAL calipers are the stiffest, lightest, and most technologically advanced calipers available at any price
CP9660 calipers use a 18mm thick, commonly available brake pad shape
Ventilated, domed back, stainless steel pistons keep heat out of the brake fluid and provide an ultra-firm pedal
Mitigation of pad knockback via anti-knockback springs behind the caliper pistons
Stainless steel caliper hardware for a long caliper service life under frequent pad change conditions
High temperature, low drag seals that will hold up to track temps= less rebuilding and longer service life
No dust boots to burn up
Simple pad change with two bolts or quick-change spring clip, no caliper removal required
Lifetime professional caliper rebuilding support by Essex (at a fee)- pull off your calipers, send them to us, we clean, inspect, and rebuild them
Available disc burnishing service ensures that your kit arrives ready to be installed and driven hard immediately
Championship winning, 72 vane, fully floating, AP Racing J Hook racing discs with 12 attachment points to hat
Anti-knockback/anti-rattle disc attachment hardware
Replacement iron disc rings available at an extremely competitive replacement price
Disc metallurgy specifically designed to handle the temps typically seen on track offer a long service life
Highest quality, Spiegler stainless steel brake line with clear sheath that reduces compliance over OEM rubber design

Features:

Saves approximately 14 unsprung lbs. from nose vs. OEM Z51 brakes
Features AP Racing CP9660 Radi-CAL calipers
Jewel-like ENP caliper finish is incredibly durable and easy to clean
372x34mm, 72 vane AP Racing J Hook discs
Every component designed to resist the heat of extended track sessions
Pistons sized properly to allow for integration with OEM master cylinder and ABS system
Designed to work with OEM rear brakes or our Essex/AP Racing rear BBK
Fits behind OEM 'Trident' wheels without a wheel spacer

Specifications:

Caliper: CP9660-2/3S4L, 6 pot,ENP
Disc Size/Vanes: 372x34/72V
Brake Disc
Brake Pads

What's in the Box?

One pair AP Racing CP9660 Radi-CAL Pro5000R six piston calipers in ENP (Electroless Nickel Plated) finish
One pair 372x34mm AP Racing CP7177, 72 vane, J Hook racing discs, with fully floating 6061 hard anodized aluminum hats, and attachment hardware
One pair caliper mounting brackets and hardware
One pair Spiegler Stainless Steel Brake Lines with abrasion resistant coating
Detailed installation instructions
Brake pads are NOT included with our system. Racing brake pads are a highly personal choice. Many manufacturers include a set of inexpensive, low quality pads with their brake kits. Rather than artificially inflating the price of our system with a set of pads you probably don't want anyway, we've decided to remove the cost from our system and allow our customers to choose the pads that best suit their needs/wants.
Pad Tension Clips (frequently referred to as anti-rattle clips) are NOT included with our Competition Kits, but we do offer them as an option if you're concerned about NVH. One of the great benefits of the AP Racing calipers in our system is that they are designed to accommodate pads from a wide range of manufacturers. Each manufacturer builds their pads with specifications that are slightly different. As such, pads from different manufacturers, or even from different batches, won't always fit in the calipers in exactly the same manner. Some pads are a snug fit, while others may rattle around and produce noise. The Essex Designed Pad Tension Kit is designed to dramatically reduce pad movement inside the caliper, along with just about all resulting noise.

Fitment:

Chevrolet C8 Corvette Base and Z51 (Radi-CAL Pro5000R) 2020+

Notes:

Brake pads are NOT included with our system.
Each caliper requires one Pad Tension Kit. If you need enough tension blocks for both of your calipers, you need to order two of these kits!
Fits 19" OEM Z51

This product was added to our catalog on Tuesday 21 May, 2024.

Points & Rewards Information

Points Credit : 5,499 points Currently valued at $164.97 Write a Review and earn $1.5 worth of points. Please check the Reward Point Program FAQ for more information.

Product 1546 of 2135 in category C8 Corvette Accessories

AP Racing Essex Front CP9660-2/3S4L 6 pot 372x34/72V Radi-CAL ENP Competition Brake Kit Chevrolet C8 Corvette Base, Z51 2020+

Home

Specials

My Account

Call Us: