20-23+ C8 Corvette Lowering Springs, by Hyperco - 1 inch, Pair wiith Pin tool and Socket

$439.00

Model: PP-S0002-SKT-PIN Manufacturers: Paragon

Qty:

Reviews

Add to Wish List

Description

By starting work early on with Hyperco, Paragon Performance helped create a lowering spring option for the C8 Corvette cars with Mag Ride, and with or without front lift.

With Mag Ride Socket and Mag Ride De-Pin Tooll included.

LOWERS 1 INCH ON ALL C8 CORVETTE CARS

The lowering spring kit offers 1 inch of lowering front and rear. Combine that with the factory adjust-ability of .75 inch lowering on Z51 cars you can achieve a total lowering of 1.75-2 inches on the Z51 cars. The spring is also 30% stiffer than factory giving increased handling without sacrificing low speed ride comfort. Cars that have front lift can use these springs and our lowering collars up front to achieve the same drop.

These have been specifically engineered to work with the factory shocks. Using 3D scanning technology the entire suspension was scanned, measured, and studied. This resulted in a spring that works with the factory shocks to maintain correct geometries while lowering the vehicle and increasing handling. Anything beyond what these springs offer would require an entire new set up, much like aftermarket coilovers.

Fits all C8 Corvettes - (Base, Z51, Front Lift, Mag Ride - All verified @ Paragon )
Smooth ride
Mag Ride functions like factory
Front Lift still functions like factory
1 Inch of lowering
Z51 cars can achieve a full 1.75-2 inch drop if they choose via OEM lowering spring perch or by using our lowering collars for front lift cars.
30% stiffness increase over stock
300lbs/in Front Spring Rate - Linear
270lbs/in Rear Spring Rate - 350lbs/in Final Rear Spring Rate - Progressive
Powder Coated Black for OEM like look
Fatigue tested 140,000 jounce to rebound cycles with no issues.
Made in USA
Lifetime Warranty
Works with Paragon front lift lowering collars
Works with Paragon 20mm Spacers
* cars with all 3 ( lowering collars, 20mm spacers, and springs ) will need to run front camber of -1.5 degrees.

Photos Below: Lowering collars (same for Z51 cars who have lowered via spring perch) + Lowering Springs + Wheel Spacers + -3 Camber (track alignment)

This product was added to our catalog on Tuesday 24 September, 2024.

Points & Rewards Information

Points Credit : 439 points Currently valued at $13.17 Write a Review and earn $1.5 worth of points. Please check the Reward Point Program FAQ for more information.

Product 2134 of 2164 in category C8 Corvette Accessories

20-23+ C8 Corvette Lowering Springs, by Hyperco - 1 inch, Pair wiith Pin tool and Socket

Home

Specials

My Account

Call Us: