Manufacturers
Paragon Performance Factory Z51 Coilcover Wrench Set Chevrolet Corvette C8 2020-2021  Product 765 of 2209 in category C8 Corvette Accessories  20-23+ C8 Corvette Magnetic Ride Socket

20-23+ C8 Corvette Lowering Springs, by Hyperco - 1 inch, Pair

20-23+ C8 Corvette Lowering Springs, by Hyperco - 1 inch, Pair
$345.99 
Qty:

Add to Wish List

By starting work early on with Hyperco, Paragon Performance helped create a lowering spring option for the C8 Corvette cars with Mag Ride, and with or without front lift.

 
LOWERS 1 INCH ON ALL C8 CORVETTE CARS

The lowering spring kit offers 1 inch of lowering front and rear. Combine that with the factory adjust-ability of .75 inch lowering on Z51 cars you can achieve a total lowering of 1.75-2 inches on the Z51 cars. The spring is also 30% stiffer than factory giving increased handling without sacrificing low speed ride comfort. Cars that have front lift can use these springs and our lowering collars up front to achieve the same drop.

These have been specifically engineered to work with the factory shocks. Using 3D scanning technology the entire suspension was scanned, measured, and studied. This resulted in a spring that works with the factory shocks to maintain correct geometries while lowering the vehicle and increasing handling. Anything beyond what these springs offer would require an entire new set up, much like aftermarket coilovers.
 
  • Fits all C8 Corvettes - (Base, Z51, Front Lift, Mag Ride - All verified @ Paragon )
  • Smooth ride
  • Mag Ride functions like factory
  • Front Lift still functions like factory
  • 1 Inch of lowering
  • Z51 cars can achieve a full 1.75-2 inch drop if they choose via OEM lowering spring perch or by using our lowering collars for front lift cars.
  • 30% stiffness increase over stock
  • 300lbs/in Front Spring Rate - Linear
  • 270lbs/in Rear Spring Rate - 350lbs/in Final Rear Spring Rate - Progressive 
  • Powder Coated Black for OEM like look
  • Fatigue tested 140,000 jounce to rebound cycles with no issues.
  • Made in USA
  • Lifetime Warranty
  • Works with Paragon front lift lowering collars
  • Works with Paragon 20mm Spacers
    * cars with all 3 ( lowering collars, 20mm spacers, and springs ) will need to run front camber of -1.5 degrees.
Photos Below: Lowering collars (same for Z51 cars who have lowered via spring perch) + Lowering Springs + Wheel Spacers + -3 Camber (track alignment)
 
 
 
 
 
 
 

This product was added to our catalog on Friday 23 December, 2022.
Points & Rewards Information
Points Credit : 346 points Currently valued at $10.38
Write a Review and earn $1.5 worth of points.
Please check the Reward Point Program FAQ for more information.
Paragon Performance Factory Z51 Coilcover Wrench Set Chevrolet Corvette C8 2020-2021  Product 765 of 2209 in category C8 Corvette Accessories  20-23+ C8 Corvette Magnetic Ride Socket
Manufacturers
  • Shopping Cart
  • 0 items
My Account Info
Live Support
Advanced Search

Use keywords to find the product you are looking for.
Payments Accepted
BOX_INFORMATION_CARD
BOX_INFORMATION_CARD
Social Networking


Check us out on Facebook!

Follow us on Twitter!
See our Videos on YouTube!

Check out our eBay Store!

Trade Associations

C6 Performance is a Proud Member of SEMAProud Member of The National Corvette Museum

Win with C6 Performance, the Best place for quality C8, C7, C6, C5 Grand Sport, ZR1 and Z06 Corvette and Camaro Parts
WARNING: Cancer and Reproductive Harm - www.P65warnings.ca.gov WARNING: Cancer and Reproductive Harm - www.P65warnings.ca.gov
All Content COPYRIGHT 2000-2024 C8 Motorsports LLC and Loaded Commerce. All Rights Reserved.