AIS Stage 1 Competition Fender Mount Adjustable Boost Activated
Water Methanol Injection System
Here it is for the ultimate in performance and affordability.
Our competition fender/firewall mount adjustable boost activated
water methanol kit is one of our best sellers. Designed
specifically for those who are on a budget. This is a good choice
for low to medium boost set ups, intercooled or non-intercooled,
who are looking for an affordable octane enhancement and
substantial drop in air charge temperatures. This kit comes with
everything you need including the tank. See exact system contents
listed below.
System Contents Include:
Competition 3 quart tank
250 psi pump with EPDM seals for 100% methanol
or alcohol
Adjustable boost activated switch from 1-25
psi
Heavy duty check valve with quick
disconnects
20 ft of black high pressure tubing
5 ft of vacuum tubing
25 ft of electrical wire
Green LED status light
Nickel plated injector
Interchangeable nozzle sized to application
Fuse holder with fuse
10 ea. 8" zip ties
5 ea 4" zip ties
Hardware for securing pump to vehicle
Engineered specifically for both carbureted and EFI forced
induction applications. Our Stage 1 boost activated fender/firewall
mount kit is as affordable as it gets. Once installed and hooked
up, operation is very simple. Simply begin by adjusting the
adjustable boost activated switch mounted on the pump to your
desired boost activation point ranging from 1-25 psi. During
driving conditions, the system will remain on stand by untill the
predetermined boost activation point is reached. Once activated the
system will spray a flat continues amount of fluid through the
nozzle or nozzles. The water alcohol injection system will remain
on until boost drops back down below the set activation point.
System then remains on stand by ready to be activated again.
Lower Air Temps By 50-200+ Degrees & Increase Power 10-15%
With ONLY Windshield Wiper Fluid!
That's right! Using nothing more then windshield wiper fluid you
can quickly achieve the benefits of a water methanol injection
system. Best of all, it's very easy to locate just about anywhere
in the states and cost only $2.00-$3.00 per gallon. But not just
any windshield wiper fluid will do. You'll need to buy the
windshield wiper fluid that is rated for negative 20 degrees or
greater below zero. It is only this windshield wiper fluid, which
contains a 50% content or greater of methanol. Using strictly
windshield wiper fluid you can expect to see a 50-250+ degree drop
in air intake charge temperatures on supercharged and turbocharged
engines with horsepower gains ranging from 10-15% are common.
(temperature drops and horsepower gains vary depending on engine
build, type supercharger or turbocharger used, amount of boost and
intercooled or non-intercooled)
110+ Plus Octane With ONLY Wind Shield Wiper Fluid!
Thats right! Using nothing more then windshield wiper fluid as
listed above you can effectively increase your 91-93 octane pump
gas by 10-20+ points dramatically increasing your fuels octane
rating well over 100+ octane. No need for expensive racing fuels
which can cost as much as $16.00 per gallon at some race tracks.
Windshield wiper fluid cost's only $2.00-$3.00 per gallon. Even
better our 1.5 gallon trunk mount container will last up to 2-3
weeks before needing to be refilled on a typical 500-600 horsepower
supercharged or turbocharged motor costing you only pennies more
per gallon to have 100+ octane.
Water Methanol Injection = Cheap Insurance For Your Motor
You wouldn't drive your car with out car insurance. Now theres
insurance for your motor. Protect your motor and the investment you
have in your motor with proven lower air intake charge temperatures
by 50-250+ degrees and increased octane by 10-20+ points. Together
this will reduce and help eliminate engine damaging detonation.
It's cheap insurance for your motor.
Benefits Of Water Methanol Injection:
Lower air charge temperatures by 50-250+
degrees
Reduces cylinder temperatures up to 300+
degrees
Increase your 87-93 pump gas by 8-20+ points
Increase horsepower safely by 10-15%
Allows you to safely run more boost and
timing
Cools and protects the tops of your pistons and
upper ring
Longer more stable combustion expansion and
progression
Removes carbon build up from combustion
chambers, pistons and valves
Reduces & helps eliminate engine damaging
detonation & pre-ignition
No need for expensive racing fuel or
additives
Features vs. Leading Competitors:
Compatible with 100% alcohol, methanol or
ethanol
Nickel plated injector nozzle holder
Check valve with quick connect fittings for
quick installation
Lightning fast response via boost signal
Important Notes:
Requires only basic hand tools to install
with the exception of a tap set to thread and install injector
Proper tuning is required to achieve maximum
results
Installation Time:
Installation time approx. 4-5 hours
Availability:
This product normally ships within 1-2
business days when in stock. All customers will be notified of
availability time shortly after orders are placed
Warranty:
Lifetime Warranty
|