Clutch Kit, Dual Friction, Single Disc, 11 in Diameter, 1-1/8 in x 26 Spline, Sprung Hub, Organic / Carbon, GM LS-Series 1997-2005, Kit
1997-2005 Chevy Corvette C5 aned C6 1998-2002 Chevy Camaro Z28/Pontiac Firebird
Dual Friction Clutch, Pressure Plate: 11", Disc: 1-1/8" x 26 spline
Note: GM Cylinder and Release Bearing #12565145 required
Up to 90% Increase in Holding Capacity Compared to Stock These clutch sets, which include a pressure plate and disc, are designed for high-horsepower, high-torque output engines. They're also great for radically-altered street and four-wheel drive with tall tires vehicles.
Flywheels: All Centerforce clutches need to be installed on a clean,properly resurfaced or brand new flywheel. Flywheels must be withinoriginal equipment specifications. Centerforce clutches are designed to beused on flywheels made of original equipment cast iron, aftermarket steelor aluminum flywheels with steel inserts.Break-In: All Centerforce clutches require a break-in period of 450-500miles of stop-and-go street driving before applying full engine power. Thisperiod is required to properly seat the disc with the pressure plate andflywheel.Centrifugal Weight System: If your new Centerforce clutch is equippedwith the centrifugal weight system, do not remove the ring, weights orspring wire retaining the weight system to the diaphragm fingers. If yourCenterforce clutch does not include the centrifugal weight system, it isbecause there is not sufficient clearance for Centerforce to safely &effectively install the centrifugal weight system.
Notes: THIS APPLICATION REQUIRES CENTERFORCE FLYWHEEL |