FlexKORE front and rear C5/C6 conversion brake line kits plus rear axle drop. Designed to work in conjunction with the C5/C6 calipers and your original hard line at the frame and axle. Kit includes the following components: (2) FlexKORE brake lines for front C5/C6 calipers (2) FlexKORE brake lines for rear C5/C6 calipers (4) M10-1 banjo bolts (8) 10mm crush washers (2) 5/8" brake line brackets (5) spring clips Four (4) custom configured FlexKORE brake lines.
FlexKORE Brake Line Construction:
Features and Benefits
All brake hoses are constructed using a superior 5 layer hose design: 1/8"ID X 3/16"OD PTFE (Teflon) hose 100% compatible with all brake fluids: DOT 3/4/5/5.1 Flexible and impact resistant Chemically inert/stable/nonreactive High temperature resistance: Max operating temp = 500F (260C) Excellent resistance to aging and degradation Kevlar braided sheath 5X greater strength to weight ratio than steel Lightweight and flexible Reinforces the Teflon hose to virtually eliminate expansion under braking without chafing the Teflon hose Rubber barrier & isolation layer 300 series stainless steel wire braid Reinforces the Kevlar braid for additional resistance to expansion Protects the hose from debris and other road hazards Excellent corrosion resistance PVC jacket Protective outer layer to keep dirt and other abrasives from penetrating the stainless steel braid thereby maximizing the life of the hose.
Color options: Red, Orange, Yellow, Green, Blue, Black, Smoke (Grey), Clear (Stainless)Z
Note 1: Most pre-configured hoses are stocked in "Clear" only. Custom colors typically add 1-3 weeks to the delivery to allow for manufacture. Please contact us if you have any questions
Red FlexKORE Hose Orange FlexKORE Hose Yellow FlexKORE Hose Green FlexKORE Hose Blue FlexKORE Hose Black FlexKORE Hose Smoke FlexKORE Hose Clear FlexKORE Hose One piece fittings specifically designed and manufactured for use with the 5-layer hose described above resulting in very high fitting pull-off strengths. Street Legal: All brake hose assemblies are designed and manufactured to comply with US Federal D.O.T. MVSS-106. All hose assemblies pressure tested to 4500 psi [31 MPa] after assembly. Hose specifications: Operating Pressure = 1750 psi [12.1 MPa] Burst Pressure = 7000 psi [48.3 MPa] Minimum Bend Radius = 2" [50mm] Outside Diameter = .350" [8.9mm] Teflon and Kevlar are both registered trademarks of DuPont or its affiliates. NOTE: Two (2) crush washers will be provided with each banjo fitting specified. Banjo bolts, brackets, clips, and additional crush washers are all available seperately. We stock Clear ONLY, Optional Colors will take 1-2 weeks for production time. Brake line kit comes with all the necessary components for a complete installation of front and rear axle. These lines are built to KORE3 specifications, meeting D.O.T. Certification. Stainless steel brake lines improve braking performance, eliminates the spongy feel of rubber hoses and provides superior resistance to corrosion.
|