Halltech Hornet 103.5mm Nylon 66 MAF Sensor Corvette and others, uses LS7 style MAF Sensor

Halltech 103.5mm Nylon 66 MAF Sensor-This is our exclusive 103.5 mm MAF sensor, which can be used a a separate MAF for forced induction applications. It is already integrated into the Killer Bee™ Ambient Air Induction System, so a separate MAF is not required. It utilizes the stock LS7 or LS3 Hitachi MAF meter, and has a OEM style receiver for the o-ring gasket for a perfect seal. Marine grade stainless steel allen screws and washers come with this MAF and two 4"X4" high temp silicone hoses and marine stainless hose clamps. We can provide the stock LS7 MAF code, but your application will require special tuning. Independent engine dyno testing has shown +12 HP with the Halltech Hornet™ MAF Housing and the stock LS7 meter. This MAF cannot be used in place of the stock Delphi MAF sensor in the stock application. We use this MAF housing in our Killer Bee™ AAIS by integrating it into the bridge for ultra high flow. This pricing does not include the GM MAF meter.

Features

* Aftermarket Twin Turbo or Supercharger Ready
* +12 HP on a 731HP LS7 built and dynoed by Schwartz Performance
* Plug and Play Wire Harness for Delphi 85 Conversion
* Lowest Resistance of any MAF on the Market
* Largest MAF available on the market
* Same MAF used on the Killer Bee™ AAIS (Bonded to the bridge)
* Comes with High Temp Silicone Hose and Stainless Hose Clamps
* Does not include the Hitachi MAF sensor (optional)
* Halltech MAF code sent by email free of charge
* Optional Performance ECM Tuning Available